Glossary
The Tree Glossary
Plain-English meanings for notch, hinge, rigging, crown thinning, topping, DBH and the other words you will meet in a tree quote.

- Arborist
- A person who studies and cares for trees. Some hold credentials from an arborist association. Ask any company what training its crew has.
- Back cut
- The final cut on the opposite side of a felling notch. It leaves a strip of wood, the hinge, that steers the tree.
- Bucking
- Cutting a fallen tree or limb into shorter lengths.
- Bucket truck
- A truck with an arm and a basket that lifts a worker to the crown of a tree.
- Cabling
- Installing steel cables high in a tree to hold two weak stems together.
- Chipper
- A machine that feeds branches through spinning blades and turns them into wood chips.
- Climbing line
- The rope a tree climber uses to move through a tree and stay attached to it.
- Collar
- The slightly raised ring of tissue where a branch joins the trunk. Pruning cuts are made just outside it.
- Compartmentalize
- The way a tree walls off a wound so decay does not spread. Good cuts help it work.
- Crown
- The leafy upper part of a tree: its branches and leaves.
- Crown reduction
- Shortening the outer ends of branches to reduce the size of the crown, cut back to a smaller branch.
- Crown thinning
- Removing selected branches inside the crown to let light and wind through.
- DBH
- Diameter at breast height: the trunk's width about four and a half feet above the ground. Many permit rules use it.
- Deadwood
- Dead branches in a live tree. They are the first to fall in a storm.
- Fall zone
- The area where a tree or a limb could land. A common rule of thumb is the tree's height plus a margin.
- Felling
- Cutting a tree down so that it falls in one piece.
- Girdling root
- A root that circles the trunk and slowly squeezes it.
- Hanger
- A broken limb that is caught up in a tree and has not fallen yet.
- Hinge
- The strip of wood left between the notch and the back cut. It controls the direction of the fall.
- Lion tailing
- Stripping the inner branches so only tufts remain at the ends. It harms the tree.
- Notch
- A wedge cut out of the trunk on the side the tree should fall toward.
- Pole saw
- A saw on a long pole used to cut branches from the ground.
- Rigging
- Ropes, pulleys and friction devices used to lower pieces of a tree under control.
- Root plate
- The disc of roots and soil that stands up when a tree is uprooted.
- Sectional removal
- Taking a tree down in pieces from the top, instead of felling it whole.
- Stump grinder
- A machine with a spinning toothed wheel that grinds a stump into chips below the surface.
- Topping
- Cutting large limbs back to stubs. It weakens a tree and is not good practice.
- Union
- The point where two stems or branches join. A weak union can split.
- Widowmaker
- A broken limb or dead top that can fall without warning.
- Wound wood
- The swollen ring of new growth around a pruning cut as the tree seals it.
No word matches that search. Try a shorter word.
Still have a question?
Ask us. We are happy to explain anything in a quote or a plan.
If anyone is hurt or a power line is involved, call 911 and your utility first.
